In-depth description of the product and its advantages

COMCAT Nd-FC

Introduction

Synthetic Rubber producers of Polybutadiene (PBD) are being confronted with increasing demands from tire companies, for polymers that have improved physical properties to achieve the high requirements in energy efficiencies of modern tyres.

Traditionally polybutadiene was, and still is manufactured in many parts of the world, by polymerisation of 1.3-Butadiene in solvent processes using Cobalt- or Nickel based Ziegler-Natta catalyst systems.

From 1980 onward, some synthetic rubber producers started to introduce neodymium catalyzed polybutadiene into the market. This rubber, commonly referred to as Nd-BR, is characterized by improved physical strength properties, resistance to crack propagation, and it ensures lower rolling resistance in tires where the tread contains Nd-BR, in comparison to those tires formulated with conventional Ni-BR’s, or Co-BR’s.

As such, Nd-BR is a fundamental part of the evolution of the “Green Tire” technology, currently assuming a prominent role in markets such as the European Union, where high demands are made on OEM’s to utilize tires with improved properties, in order to lower automotive emmisions of greenhouse gases.

 

Current Catalyst Technology

Comar Chemicals (Pty) Ltd has become an established world-wide supplier of Neodymium Versatate (Nd-V), from its state-of-the art factories in Switzerland and South Africa.

Nd-V is the best component to manufacture a highly active Neodymium based Ziegler-Natta catalyst system. The polymerisation catalyst can be used in two ways:

Preformation Process:

The catalyst is made in a separate preformation reactor and used in the polymerisation reactor in a batch Process.

In-Situ Process:

As an alternative, the catalyst is formed in-situ in the process itself, by injecting all necessary components of the final catalyst directly, together with the monomer into the polymerisation reactors.

In both, the in-situ and pre-formed catalyst preparation process, the final polymerisation catalyst is made from the chemical reaction of three main components:

  •  A source of Neodymium, such as Neodymium Versatate (Nd-V, COMCAT Nd-V), dissolved in Hexane
  •  An alkylating agent, such as Di-isobutyl Aluminium Hydride (DIBAH)
  •  A halide, emanating for example from Ethylaluminiumsesquichloride (EASC)

The resultant highly active catalyst complex, is a mixture of different active species, which, in the case of the Pre-form process, continue to change during catalyst storage, a phenomenon called «Ageing Effect» of the Zieger-Natta-Catalyst.

Both, In-situ and Pre-formed catalysts, induce the formation of a desired polymer with a highly linear structure and mostly in the conformational CIS isomeric form. Due to the presence of a highly active but undesirable catalyst species in conventional Nd catalyst systems, an undesirable very high molecular weight (MW) polymer is also formed in parallel reactions.

The effect of this high MW polymer in Nd-BR is summarized as follows:

  •  Broad, asymmetrical polymer molecular weight distributon (MWD)
  •  Hardness of the polymer, resulting in processing difficulties of the Nd-BR
  •  Difficulties in the processing of Nd-BR in rubber finishing steps of the synthetic rubber producers

 

The New Catalyst Technology

Comar Chemicals (Pty) Ltd can announce that it can offer synthetic rubber producers a definitive innovation in catalyst technology, by presenting a new catalyst, called COMCAT Nd-FC.

This unique product is a finished Neodymium based Ziegler-Natta catalyst that will directly polymerize 1.3-Butadiene, in a solvent based polymerization process.

The characteristics of this product are:

  •  high activity of the catalyst, resulting in 40 – 60 % lower Nd usage
  •  single-site catalyst
  •  no «Ageing Effect» during Catalyst storage is observed

(COMCAT Nd-FC will lead to PBD with constant properties,

even after 6 months storage)

More importantly, the resultant polybutadiene is characterized by :

  1. symmetrical MWD, and absence of high MW polymer 

     COMCAT Nd-FC/G2   /   Conventional Nd Catalyst

 SymetricalMWD

  1. higher average Mn and Mw for a given Mooney, and hence improved physical properties of the rubber

(Link to the table comparing physical properties)

  1. reduced tackiness of the polymer crumbs, leading to less blockages, and better de-watering in rubber finishing plants
  2. lower Nd-BR solution viscosity
  3. quicker carbon-black incorporation times in compounding

 

Product Technical Data

Product Literature of COMCAT Nd-FC

  • pdf icon Specification Data Sheet
  • pdf icon Material Safety Data Sheet

 

Packaging

Future:

In 2017, the catalyst will be available from our new plant in Switzerland as a liquid, in a concentrated, solvent-free formulation. (Nd concentration: of 0.28 mol/l).

Present:

Currently the catalyst is available in a diluted form, containing polymerisation grade hexane in 16 mt T-14 Isotainers (Nd concentration: 0.06 mol/l).

Isotainer           

For laboratory trials:

Quantities of 1 l are available from sample forms (1 l canisters).

Samplecanister2

 

Regulatory

REACH registration for COMCAT Nd-FC has been obtained. Link to the certificate: pdf icon

TSCA registration is expected to be available early in 2017.

 

Technical Support

Comar’s specialized technicians are able to assist synthetic rubber producers who wish to convert from outdated Ni- or Co- Ziegler Natta technology, to the advanced COMCAT Nd-FC system.

This can include :

  1. Detailed recommendations and procedures for laboratory evaluations
  2. On-site assistance in plant trials
  3. Analytical backup to verify polymer properties
  4. Assistance to modify your existing Polymerisation plant for the new Nd-FC catalyst technology

We invite you to make contact with us via our product enquiry form to discuss and explore this exciting new technology with you.